Check that the document matches the product.
In This Guide 6
A material document is useful when its product, variant and scope match the option you are assessing. Start there before relying on a performance figure, test result or environmental statement.
Record the document’s issuer and date, then identify the decision it can support. Keep product suitability, sourcing availability and project approval as separate questions.
Identify the exact product
Write the manufacturer, product name, variant, format and intended application at the top of your review. Check those details against each document.
A document for another thickness, formulation, finish or product system should not be silently transferred to the option under review. Ask the manufacturer to explain whether it applies and request the correct document where needed.
Use a document review register
| Field | Reviewer’s check |
|---|---|
| Product identity | Does the document name the exact product and relevant variant? |
| Issuer | Who produced or issued it, and in what role? |
| Edition and date | Is its version identifiable, and what needs a current confirmation? |
| Scope | What product, test, intended use or environmental claim does it address? |
| Conditions | Which installation, build-up or test conditions accompany the statement? |
| Missing information | What is absent, unclear or inconsistent with another document? |
| Decision supported | What can the project team decide from this evidence? |
| Next action | Which question goes to the manufacturer or responsible professional? |
Keep the original document reference beside the summary. Another reviewer should be able to see how the interpretation was reached.
Keep document types separate
A technical sheet, intended-use declaration, test report and environmental document perform different jobs. Read each for the question it addresses.
For a technical sheet, identify which properties are stated and which conditions accompany them. For a test report, examine the tested product and setup before relating the result to a project application. For an intended-use document, check the product and scope described. For an environmental document, keep the product identity and the basis of any comparison visible.
Do not use one document to answer a question outside its scope. A product document does not establish current stock or supply timing. A supply confirmation does not establish technical suitability.
Check the proposed build-up
Give the responsible designer or specialist the document and the actual application. Ask which properties and conditions matter to that use, what project requirements must be checked and whether additional evidence is needed.
This is particularly important when a proposed alternative changes connections, exposure, installation or another part of the build-up. The review should establish the next technical question rather than assume that a familiar material family means a straightforward substitution.
Handle environmental claims with the same discipline
If a product has an environmental document or statement, identify exactly which product and scope it covers. Ask what evidence would be needed for the claim you intend to make or the comparison you intend to use.
Do not describe a product as lower impact solely because its material family sounds natural. Keep an unassessed claim open until the relevant evidence and comparison have been reviewed.
Decide what happens next
Record the next-step decision:
- Continue review: the product and document match, and the evidence supports the next defined assessment.
- Request clarification: a date, variant, condition or claimed property is unclear.
- Request further evidence: an important project question is not answered by the supplied documents.
- Remove from this shortlist: the available evidence establishes a mismatch with a mandatory requirement.
Record who makes the technical decision. Keep manufacturer enquiries about samples, quantities, delivery and availability alongside the sourcing brief rather than treating them as technical approval.
EcoGaboon can help connect the project requirement with material discovery, manufacturer information and sourcing questions. Share the application, the product under consideration and the documents you already have.