Skip to Content
EcoGaboonSource With Us

Polyester Fibre Panels

Explore polyester fibre panels through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Polyester Fibre Panels

Why Polyester Fibre Panels

Properties from the listed products' own documents. Check each one against your project.

Composition

100% polyester fibre (PET)

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p2

Recycled content, data sheet

Average 58%, varies by colour; specification clause "not less than 58%" %. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Recycled content, UK product page

Minimum 75% %. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1

Panel size

1220 x 2440 (tolerance +5 x +10) mm

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p2

Thickness

25, 50, 75, 100 (tolerance ±6%) mm

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p2

Weight, 25 / 50 / 75 / 100 mm

2100 / 3600 / 3850 / 4100 g/m²

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p2

Limitations and What to Check

Read the exact product and source before specifying.

Quietspace Panel

  • Recycled content: the UK data sheet states an average of 58% (not less than 58% in the specification clause) and the UK product page states a minimum of 75%. Ask Autex for the style-specific minimum in writing for the colour chosen.
  • The EPD is per kg of panel, not per m², and its 25 mm mass (2.30 kg/m²) differs from the data sheet weight (2100 g/m²). Confirm the mass to use before converting EPD results to a per m² figure.
  • The EPD expires on 24 January 2027; ask whether a renewed EPD is in preparation.
  • The EPD is based on New Zealand manufacture while the UK page states the product is made in Britain; confirm whether the EPD represents the panels supplied to UK projects.
  • EU reaction to fire is B-s2, d2 (d2 means flaming droplets are not excluded); check suitability for the room use, escape routes and ceilings under national rules, and obtain the classification reports.
  • No DoP or UKCA documentation was found; confirm UK conformity documents.
  • The data sheet absorption table prints values above 1.00 (for example 1.10 at 500 Hz for 50 mm) while describing the table as practical coefficients according to ISO 11654; ask for the test reports to confirm the figures used for design.
  • Offset-based GWP figures in the EPD should not be used in place of the LCA results.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1

Quietspace Panel

  • Wall and ceiling treatment, indoor use only (S2 p2).
  • UK product page: ceilings, walls and bespoke applications, direct fix installation (S1).
  • Conditions of use: for any use other than as a wallcovering or ceiling, seek guidance from the account manager; near fire protection systems such as sprinklers or fire alarms, the relevant building codes, standards and design rules apply and a fire protection engineer should be consulted (S2 p1, p2).
1. Interior Finishes

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
Quietspace Panel

Sound absorption, 25 mm: NRC 0.85, Class C, ISO 354 and ISO 11654 (data sheet Nov25 p1, p3)

Reaction to fire, 25 mm, wall and ceiling: B-s2, d2, BS EN 13501-1:2018 (data sheet p2)

Thickness: 25, 50, 75, 100 mm (data sheet p2)

Full Specification

Related Materials

Manufacturers

Autex Acoustics

Quietspace Panel

Sound absorption, 25 mm: NRC 0.85, Class C, ISO 354 and ISO 11654 (data sheet Nov25 p1, p3)

Reaction to fire, 25 mm, wall and ceiling: B-s2, d2, BS EN 13501-1:2018 (data sheet p2)

  • dop: Not published (none found)
  • epd: Linked (ATX AP02 2023EP, valid until 24 January 2027; opened on the programme operator's site)
  • certificate: Not checked
  • installationGuide: Not checked

Recycled content stated differently on the data sheet and product page

About the Maker

Related Guides

Guides connected to polyester fibre panels through their material topics.

No published guides are connected to this material yet.

See all polyester fibre panels guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement