Quietspace Panel
Autex Acoustics · Polyester (PET) fibre panel
A sheet acoustic panel made of 100% polyester fibre with a hard compressed face and a cushioned back, offered in 25, 50, 75 and 100 mm (S2). The EPD describes the fibre content as recycled PET fibre bands with PETG bonding fibres and a polyethylene facing share (S3 p4).
Where It Is Used
- Wall and ceiling treatment, indoor use only (S2 p2).
- UK product page: ceilings, walls and bespoke applications, direct fix installation (S1).
- Conditions of use: for any use other than as a wallcovering or ceiling, seek guidance from the account manager; near fire protection systems such as sprinklers or fire alarms, the relevant building codes, standards and design rules apply and a fire protection engineer should be consulted (S2 p1, p2).
Technical Specifications
Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.
| Property | Value | Unit | Test standard | Source document |
|---|---|---|---|---|
| Composition | 100% polyester fibre (PET) | S2 p2 | ||
| Recycled content, data sheet | Average 58%, varies by colour; specification clause "not less than 58%" | % | not stated | S2 p1 |
| Recycled content, UK product page | Minimum 75% | % | not stated | S1 |
| Panel size | 1220 x 2440 (tolerance +5 x +10) | mm | S2 p2 | |
| Thickness | 25, 50, 75, 100 (tolerance ±6%) | mm | S2 p2 | |
| Weight, 25 / 50 / 75 / 100 mm | 2100 / 3600 / 3850 / 4100 | g/m² | S2 p2 | |
| Sound absorption, 25 mm | NRC 0.85, Class C (125 to 4000 Hz: 0.15, 0.45, 0.85, 1.00, 1.00, 0.95) | ISO 354 (University of Auckland test T0712-18); ISO 11654 | S2 p1, p3 | |
| Sound absorption, 50 / 75 / 100 mm | NRC 1.00 each; 50 mm Class A | ISO 354 (tests T1228-8, T1905-4, T1905-5) | S2 p1, p3 | |
| Reaction to fire, 25 mm, wall and ceiling | B-s2, d2 (reports EUI-21-000135-E-A wall, EUI-21-000135-E-B ceiling) | class | BS EN 13501-1:2018; BS EN ISO 11925-2:2020; BS EN 13823:2020 | S2 p2 |
| Fire, room corner test | ISO 9705:1993 Group 1-S, smoke production rate < 5.0 m²/s; AS ISO 9705:2003 Group 1 (25 mm) | group | ISO 9705; AS ISO 9705; AS 5637.1:2015 | S2 p2 |
| Fire, ASTM E84 (1 inch) | Class A, FS 0, SD 10 | class | ASTM E84-14 | S2 p2 |
| Light reflectance, white | 83 | LRV | BS 8493:2008+A1:2010 | S2 p2 |
| VOC | < 0.035 (7 days), CDPH compliant | mg/m³ | CDPH Standard | S2 p1 |
| GWP-total, A1-A3, lower melt-spin energy model (4.1 MJ/kg) | 3.53 per kg of panel | kg CO2 eq. | EN 15804+A2 | S3 p15, Table 3a |
| GWP-total, A1-A3, upper melt-spin energy model (10.4 MJ/kg) | 8.31 per kg of panel | kg CO2 eq. | EN 15804+A2 | S3 p15, Table 3a |
| EPD functional unit and service life basis | 1 kg of panel; Quietspace NRC 0.85 from 2.30 kg/m² at 25 mm; 20-year reference service life | EN 15804+A2 | S3 p3 |
Reading note: the EPD reports results per kg of panel, not per m². For 25 mm the EPD states 2.30 kg/m², so a per m² figure would be the per kg result multiplied by 2.30; EcoGaboon has not made that conversion because the data sheet gives 2100 g/m² (2.10 kg/m²) for 25 mm, which does not match the EPD mass. The EPD gives two A1 to A3 results, one for a lower and one for an upper melt-spin energy assumption (S3 p15). Separately, EPD Table 1 reports "GWP with offset" values for A1 to A3 (-1.84 kg CO2e per kg for the lower model and 0.0 for the upper model); these figures depend on purchased offsets and are not LCA results (S3 p11). EcoGaboon uses the Table 3a LCA results only.
Product Documents
| Document | Reference | Issued by | Status on 9 October 2026 | Link |
|---|---|---|---|---|
| EPD | "Autex Acoustics Panels and Tiles", Quietspace ATX AP02 2023EP; EN 15804+A2, ISO 14025, ISO 21930; cradle to grave; issue date 24 January 2022, valid until 24 January 2027 (updated 20 September 2024); externally verified; LCA by The Evah Institute | Programme operator Global GreenTag Pty Ltd; independent verifier | EPD document opened on the programme operator's site; expires in about 3.5 months | S3 |
| Programme operator listing | Quietspace Panel and interior acoustic tiles; GreenRate Level A listed | Global GreenTag | Listing page opened; GreenRate certificate PDF not opened | S4 |
| Declare label | ATX-0002 (2025) | Declare programme (issuer not readable) | PDF opened but image-only, contents not readable; Declare register not opened | |
| Fire classification reports | EUI-21-000135-E-A and EUI-21-000135-E-B | Test laboratory | Not opened | |
| Health Product Declaration | Claimed on data sheet | No HPD document found; not published | ||
| DoP, UKCA, CE marking | Not found on the pages opened | not published | ||
| BRANZ appraisal, CodeMark, BBA | Not found for Quietspace Panel (a BRANZ entry seen for Quietspace Cube only, not opened) | not published |
About Autex Acoustics
- Company: Autex Industries Ltd, 702 Rosebank Road, Avondale, Auckland, New Zealand (EPD declaration owner) (S3). Offices listed in New Zealand, Australia (Essendon Fields, VIC), the United Kingdom (Unit J4, Lowfields Way, Lowfields Business Park, Elland, West Yorkshire HX5 9DA) and the United States (Los Angeles) (S2 p3).
- Availability: UK site, with a link to an Ireland site; the UK page states the product is made in Britain (S1).
- How to buy: through Autex account managers; samples at https://www.autexacoustics.co.uk/samples/#quietspace ; showrooms via the contact page (S1). No distributors are named on the UK page. Contact: https://www.autexacoustics.co.uk/contact-us/.
Sizes and Supply
| Item | Published |
|---|---|
| Panel format | 1220 x 2440 mm sheets in 25, 50, 75 and 100 mm |
| Colours and finishes | Plain colours black, grey and white, or more than 40 Vertiface overlay colours; custom printing available |
| Samples | Samples page on UK site |
| Price, MOQ, lead time, pack quantity | not published: not published |
Before You Specify
- Recycled content: the UK data sheet states an average of 58% (not less than 58% in the specification clause) and the UK product page states a minimum of 75%. Ask Autex for the style-specific minimum in writing for the colour chosen.
- The EPD is per kg of panel, not per m², and its 25 mm mass (2.30 kg/m²) differs from the data sheet weight (2100 g/m²). Confirm the mass to use before converting EPD results to a per m² figure.
- The EPD expires on 24 January 2027; ask whether a renewed EPD is in preparation.
- The EPD is based on New Zealand manufacture while the UK page states the product is made in Britain; confirm whether the EPD represents the panels supplied to UK projects.
- EU reaction to fire is B-s2, d2 (d2 means flaming droplets are not excluded); check suitability for the room use, escape routes and ceilings under national rules, and obtain the classification reports.
- No DoP or UKCA documentation was found; confirm UK conformity documents.
- The data sheet absorption table prints values above 1.00 (for example 1.10 at 500 Hz for 50 mm) while describing the table as practical coefficients according to ISO 11654; ask for the test reports to confirm the figures used for design.
- Offset-based GWP figures in the EPD should not be used in place of the LCA results.
