Glued laminated timber (GLT)
HASSLACHER NORICA TIMBER · Glued laminated timber (softwood)
A rod-shaped structural timber element made of at least two dried softwood lamellas bonded parallel to the grain, usually spruce, fir, pine or larch (S2 p3). The brochure states a melamine resin adhesive, type I to EN 301 (S3).
Where It Is Used
- DoP intended use: buildings and bridges (S1).
- EPD: all structural areas of timber construction, including bridge building; service classes 1 to 3 to EN 1995-1-1, with glued solid timber limited to service classes 1 and 2 (S2 p3).
- Product page: houses and apartment buildings, multi-storey residential and office buildings, public buildings, agricultural buildings, industrial and production halls, sports and leisure halls; roof structures, long-span beams, columns and ceiling structures (S4).
- Stated restriction: preventive chemical wood preservation is described as unusual and only permissible in limited cases (S2 p3).
Technical Specifications
Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.
| Property | Value | Unit | Test standard | Source document |
|---|---|---|---|---|
| Strength classes, spruce and fir | GL20h, GL24h, GL24c, GL28h, GL28c, GL30h, GL30c, GL32h, GL32c, GL36hHHS, GL36cHHS | class | EN 14080:2013 | S1 p2 |
| Strength classes, pine and larch | GL24h, GL24c, GL28h, GL28c | class | EN 14080:2013 | S1 p2 |
| GL36hHHS: fm,g,k / E0,g,mean / ρg,k | 36 / 15750 / 460 | N/mm² / N/mm² / kg/m³ | EN 14080:2013 | S1 p2 |
| Reaction to fire | D-s2, d0 | Euroclass | not stated | S1 p3; S3 p5 |
| Formaldehyde emission | E1 | class | not stated | S1 p3 |
| Bonding durability | MUF, Type I | type | EN 301 | S1 p3 |
| Service classes | 1 to 3 (glued solid timber 1 and 2) | class | EN 1995-1-1 | S2 p3 |
| Thermal conductivity, perpendicular to grain | 0.12 | W/(m·K) | ISO 10456 | S2 p3 |
| Specific heat capacity | 1600 | J/(kg·K) | ISO 10456 | S2 p3 |
| Average density (declared) | 480 | kg/m³ | EN 14080 | S2 p2, p3 |
| Mean moisture content | 12 +/- 2.5 | % | EN 13183-1 | S2 p3 |
| Standard heights and widths | Heights 80 to 1,280 mm in 40 mm steps; widths (60) 80 to 280 mm in 20 mm steps | mm | not stated | S3 p4 |
| Lengths | Up to 27 m; up to 42 m as special components | m | not stated | S3 p4 |
| GWP-total, A1-A3 | -6.94E+02 per 1 m³ (480 kg/m³) | kg CO2 eq. | EN 15804+A2 | S2 p8 |
| GWP-fossil, A1-A3 | 8.13E+01 per 1 m³ | kg CO2 eq. | EN 15804+A2 | S2 p8 |
| GWP-biogenic, A1-A3 | -7.76E+02 per 1 m³ | kg CO2 eq. | EN 15804+A2 | S2 p8 |
Reading note: the declared unit is 1 m³ of glued laminated timber at an average density of 480 kg/m³, about 12 % moisture, covering several glued product types from the Sachsenburg production (S2). The negative A1 to A3 GWP-total comes from the biogenic carbon term (-7.76E+02 kg CO2 eq. per m³); the EPD declares GWP-total of 7.82E+02 kg CO2 eq. per m³ in module C3, where that carbon is released at end of life (S2 p8). Read all modules together; A1 to A3 alone omits that release. The EPD average density (480 kg/m³) is an average across products and differs from the DoP characteristic and mean densities for individual strength classes (for GL36hHHS, ρg,k 460 kg/m³) (S1, S2). The DoP names the adhesive as MUF, while the brochure says melamine resin adhesive; confirm the adhesive system for the order (S1, S3).
Product Documents
| Document | Reference | Issued by | Status on 9 October 2026 | Link |
|---|---|---|---|---|
| Declaration of Performance | DOP_HHS_BSH (file version V6_0), signed Sachsenburg 31 March 2022; AVCP system 1; EN 14080:2013; notified body No. 1359 | Manufacturer-issued (HASSLACHER Holzbausysteme GmbH), with notified body certification under system 1 | Opened | S1 |
| EPD | EPD-HAS-20260506-IBC1-EN; EN 15804+A2 and ISO 14025; PCR "Solid wood products" 01.08.2021; modules A1 to A3, C1 to C4 and D; issued 11.08.2026, valid to 10.08.2031 | Programme operator IBU (Institut Bauen und Umwelt e.V.); independent verifier | EPD document opened (manufacturer-hosted copy); IBU register not opened | S2 |
| ETA | ETA-18-1018 and ETA-19-0031 listed on the product page for BauBuche and GLT Birch only, not spruce glulam | Not opened; not applicable to this product | ||
| UKCA | Listed on the product page (EN 14080:2013); a news page on UKCA certification exists | Not opened | ||
| Other certificates | ANSI A190.1, BPIR-BPIS (New Zealand), JAS (Japan), DIN 1052-10 listed on the product page | Third parties | Not opened | |
| PEFC chain of custody | PEFC/06-32-12 (logo licence) | PEFC | Shown in the brochure; PEFC register not opened | |
| FSC, BBA, CodeMark | Not found |
About HASSLACHER NORICA TIMBER
- Company: HASSLACHER Holzbausysteme GmbH, Feistritz 1, 9751 Sachsenburg, Austria (S1); part of the HASSLACHER group (EPD owner HASSLACHER Holding GmbH), trading as HASSLACHER NORICA TIMBER (S2, S4).
- Production: NORITEC Holzindustrie GmbH, Sachsenburg, Austria, per the EPD scope (S2).
- Availability: no formal list of supply countries. The product page refers to New Zealand (BPIR-BPIS), Canada and the US (product sheets from a North American partner), and shows reference projects in Denmark, Sweden, Spain, the UK, Australia and the US (S4).
- How to buy: HASSLACHER NORICA TIMBER supplies only commercial customers (S4). Sales and contact: https://www.hasslacher.com/sales.
Sizes and Supply
| Item | Published |
|---|---|
| Standard dimensions | Heights 80 to 1,280 mm in 40 mm steps; widths (60) 80 to 280 mm in 20 mm steps; lengths up to 27 m, up to 42 m as special components |
| Weight and volume tables | Published per height and width in the brochure |
| Customer type | Commercial customers only |
| Pack sizes, MOQ, lead time, price | not published: not published |
Before You Specify
- The DoP (2022) is held by HASSLACHER Holzbausysteme GmbH, while the EPD covers NORITEC Holzindustrie GmbH production at Sachsenburg; confirm which entity and plant supply the order and obtain the matching DoP.
- Several EPD numbers are in circulation (2021, 2025 and 2026); check the current one in the IBU register.
- Reaction to fire is D-s2, d0; resistance to fire is NPD in the DoP and depends on the member design. Check national rules for the building height and use.
- Glued solid timber is limited to service classes 1 and 2; glulam is stated for service classes 1 to 3.
- Supply is to commercial customers only.
6.
- Confirm the adhesive system (DoP: MUF; brochure: melamine resin).
Similar Products
STEICOflex 036STEICO SE · Wood fibre battDeclared thermal conductivity, λD: 0.036 W/(m·K)Reaction to fire: Class E
Expanded Insulation Corkboard (ICB)Amorim Cork Solutions · Expanded cork boardThermal conductivity: 0.039 W/(m·K)Reaction to fire: Class E
Kerto LVL S-beam and Q-panelMetsä Wood · Laminated veneer lumber (softwood)Strength class, S-beam: LVL 48 P, thickness 21 to 90 mmDensity, mean / 5th percentile: 510 / 480 kg/m³