STEICOflex 036 is a flexible wood fibre insulation batt for fitting between framing, with a declared thermal conductivity of 0.036 W/(m·K) (data sheet; DoP). The data sheet lists the ingredients as wood fibres, polyolefin fibres and ammonium sulfate; the EPD describes a dry-process wood fibre batt with a small share of textile binding fibres added for flexibility. The DoP covers the product types STEICO flex 036 and STEICO flex 036 Keil.
Where It Is Used
Flexible insulation for roof, wall and ceiling constructions (data sheet p1).
Cavity insulation in timber roof, wall and ceiling constructions, plus partitions and service zones (EPD p3).
Batts between framing in roofs, walls and floors (UK product range).
Conditions of Use
Store dry and protected from weathering; building moisture from screed, plaster or paint must be removed by ventilation (data sheet p3).
The data sheet states its regional validity is the EU and that local regulations are not considered (data sheet). No explicit exclusions were found.
Technical Specifications
Each value is copied from the document named beside it. Check the current document with the manufacturer before specification.
Property
Value
Unit
Test standard
Source
Product standard and designation
WF-EN 13171-T3-TR1-AFr5-MU2
EN 13171
Data sheet p1
Declared thermal conductivity, λD
0.036
W/(m·K)
EN 13171
Data sheet p1; DoP 01-0040-04
Reaction to fire
Class E
EN 13501-1
Data sheet p1; DoP 01-0040-02
Density
approx. 50
kg/m³
not stated
Data sheet p1 (EPD uses 50 kg per m³)
Water vapour diffusion resistance factor μ
2
MU2 class, EN 13171
Data sheet p1
Specific heat capacity
2,100
J/(kg·K)
not stated
Data sheet p1
Airflow resistance
at least 5
kPa·s/m²
AFr5, EN 13171
Data sheet p1
Permanent temperature range
up to 100
°C
not stated
Data sheet p1
Declared thermal resistance
2.75 at 100 mm; 6.65 at 240 mm
m²K/W
EN 13171
Data sheet p2; DoP 01-0040-04
Thickness range
30 to 240
mm
Data sheet p2; UK range
Compressive strength, water absorption, sound absorption
NPD (no performance determined)
EN 13171
DoP 01-0040-04
EPD results (declared unit and modules as stated)
GWP-total, A1-A3
-47.8 per 1 m³
kg CO2e
EN 15804+A2
EPD p7
GWP-fossil, A1-A3
35.9 per 1 m³
kg CO2e
EN 15804+A2
EPD p7
GWP-biogenic, A1-A3
-83.8 per 1 m³
kg CO2e
EN 15804+A2
EPD p7
Biogenic carbon content in product
22.4 per 1 m³
kg C
EN 15804+A2
EPD
Biogenic carbon content (data sheet figure)
approx. 82 per 1 m³
kg CO2e
EN 15804+A2 (as printed)
Data sheet p2
Reading Notes
The EPD declared unit is 1 m³ of "STEICOflex", an average of three plants (Czarnków PL 55.85%, Casteljaloux FR 28.50%, Osła PL 15.65%), not a result specific to the 036 grade. GWP-total in A1 to A3 is negative only because of the biogenic term; the EPD reports a matching release of +82.1 kg CO2e GWP-biogenic in module C3 (incineration), so GWP-total in C3 is +82.9 kg CO2e per m³. The data sheet figure of approx. 82 kg CO2e per m³ was not found as printed in the EPD sections read.
EPD results, A1 to A3, kg CO2e per 1 m³
GWP-total-47.8
GWP-fossil35.9
GWP-biogenic-83.8
-100-500+50
Source: EPD p7.
Data sheet
Technical data sheet STEICOflex 036, version 5, 2026-09-21 (EU validity)
DoP 01-0040-04
Declaration of Performance No. 01-0040-04 (EN 13171)
DoP 01-0040-02
Declaration of Performance No. 01-0040-02 (German, earlier version)
EPD
EPD NEPD-11346-11346-2, EPD Global (The Norwegian EPD Foundation), manufacturer-hosted copy
UK range
STEICO product range GBR, IRL, UKR, valid from 1 March 2026
Documents
Linked on the manufacturer's or programme operator's site. EcoGaboon does not re-host documents.
Document
Reference
Issued by
Status on 9 October 2026
Link
Declaration of Performance
No. 01-0040-04, STEICO flex 036 and STEICO flex 036 Keil, dated Feldkirchen 01.04.2026; AVCP system 3; notified body Materialprüfungsamt Nordrhein-Westfalen (0432)
NEPD-11346-11346-2, EPD Global (The Norwegian EPD Foundation); EN 15804:2012+A2:2019, NPCR Part A:2021 and NPCR 012 Part B; issued 27.03.2026, valid to 26.03.2031; external verification stated
Manufacturer Statements and the Evidence Behind Them
These are the manufacturer's statements, paraphrased, beside the independent evidence that was opened. EcoGaboon does not endorse or repeat them as its own.
The manufacturer states (paraphrased)
What EcoGaboon opened
Very good insulating properties in winter and summer (data sheet)
Only the declared λD of 0.036 W/(m·K) in the DoP (manufacturer-issued, system 3 with notified body testing). No other document opened
Independently tested and recommended by the Institut für Baubiologie Rosenheim (data sheet)
IBR certificate listed on the certificates page; not opened
Wood from PEFC-certified forestry (data sheet)
Licence code not stated; PEFC register not opened
Diffusion-open, μ 2 (data sheet)
The DoP declares MU2 (manufacturer-issued)
Biogenic carbon storage of approx. 82 kg CO2e per m³ (data sheet)
The EPD declares GWP-biogenic of -83.8 kg CO2e per m³ in A1 to A3 and biogenic carbon content of 22.4 kg C per m³, with release at end of life in C3. The 82 kg figure itself was not found in the EPD sections read
Before You Specify
Reaction to fire is Class E: check suitability for external walls and building height under Approved Document B (England) or the equivalent rules for the project's jurisdiction.
Two DoP versions were found (01-0040-02 and 01-0040-04); STEICO links DoPs to pallet labels, so confirm the DoP that applies to UK supply from the pallet label.
Formats differ between documents: the EU data sheet lists 1220 x 575 mm, the UK product range lists 1190 x 575 mm and 1190 x 375 mm. Confirm the format before ordering.
The EPD is an average for "STEICOflex" from three plants, not specific to the 036 grade or to UK supply; module A4 transport reflects its stated markets (Poland, France).
The data sheet states EU validity and that local regulations are not considered; no BBA or other UK third-party certificate was found, and UKCA status was not stated on pages opened.
The data sheet carbon figure (approx. 82 kg CO2e per m³) does not appear as printed in the EPD sections read; cite the EPD values instead.
EcoGaboon does not test products or confirm that a product suits your project or meets building regulations or fire-safety rules where you build.
Manufacturer and Supply
Company
STEICO SE, Otto-Lilienthal-Ring 30, 85622 Feldkirchen, Germany (DoP)
Availability as stated
The UK site refers to a dealer network in the UK with a downloadable UK distribution map, and to worldwide sales through key account managers (UK product page). The UK product range covers Great Britain, Ireland and Ukraine (UK range). EPD markets stated: Poland and France (EPD).
STEICOflex 036 is the only wood fibre product listed today. The wood fibre insulation page explains the material, its limits and where it is used, and compares it with the other listed insulation.
Documents opened 9 October 2026. Confirm current documents with the manufacturer before specification. This page is commercial product information, not fire-engineering, structural or legal advice. Manufacturers can correct this page: Correct this page.