Kerto LVL S-beam and Q-panel
Metsä Wood · Laminated veneer lumber (softwood)
Laminated veneer lumber made from 3 mm rotary-peeled, strength-graded softwood veneers bonded with a phenol formaldehyde adhesive into a continuous billet, then sawn into beams, planks or panels (S3 p4). In the S-beam all veneers run in one direction; in the Q-panel some veneers are crosswise to give transverse strength and stiffness (S3 p4).
Where It Is Used
- DoP intended use: buildings and bridges (S1, S2).
- EPD: load-bearing and non-load-bearing structures such as beams, headers, studs, columns and panels for roof, wall and floor elements (S3 p5).
- Product page: beams and headers, lintels, floor joists, rafters and ridge beams, truss chords, studs and columns, portal frames, element components, industrial components such as doors and windows, concrete formwork and scaffolding (S5).
- Conditions of use: DoP values are for structural design to EN 1995 (Eurocode 5); in service class 2 the S-beam compression value fc,0,k of 35.0 N/mm² is recommended to be divided by 1.2 (S1 footnote).
Technical Specifications
Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.
| Property | Value | Unit | Test standard | Source document |
|---|---|---|---|---|
| Strength class, S-beam | LVL 48 P, thickness 21 to 90 mm | EN 14374:2004 | S1 p2 | |
| Strength class, Q-panel | LVL 32 C (21 to 24 mm); LVL 36 C (27 to 75 mm) | EN 14374:2004 | S2 p3 | |
| Modulus of elasticity, parallel to grain | S-beam E0,mean 13800, E0,k 11600; Q-panel E0,mean 10000 (LVL 32 C) / 10500 (LVL 36 C) | N/mm² | EN 14374:2004 | S1 p2; S2 p3 |
| Bending strength fm,0,edge,k (depth 300 mm) | S-beam 44.0; Q-panel 28.0 (LVL 32 C) / 32.0 (LVL 36 C) | N/mm² | EN 14374:2004 | S1 p2; S2 p3 |
| Compression fc,0,k, S-beam | 35.0 (divide by 1.2 in service class 2, as recommended) | N/mm² | EN 14374:2004 | S1 p2 |
| Tension ft,0,k (length 3000 mm), S-beam | 35.0 | N/mm² | EN 14374:2004 | S1 p2 |
| Shear fv,0,edge,k, S-beam | 4.2 | N/mm² | EN 14374:2004 | S1 p2 |
| Density, mean / 5th percentile (S-beam and Q-panel) | 510 / 480 | kg/m³ | EN 14374:2004 | S1 p2; S2 p3 |
| Reaction to fire, any substrate or air gap, min 21 mm | D-s2, d0 (floorings Dfl-s1) | Euroclass | EN 14374 (DoP) | S1 p3; S2 p4 |
| Reaction to fire, min 27 mm, stated end-use conditions | D-s1, d0 | Euroclass | EN 14374 (DoP) | S1 p3; S2 p4 |
| Formaldehyde release | E1 (DoP); approx. 0.018 ppm, equal to 0.022 mg/m³ (EPD) | class / ppm | EN 717-1 (EPD) | S1; S2; S3 p6 |
| Durability against biological attack | Durability class 5 (includes sapwood) | class | EN 350-2 | S1; S2 |
| Thermal conductivity | not published | |||
| GWP-total, A1-A3 | -6.72E+02 per 1 m³ Kerto LVL | kg CO2 eq. | EN 15804+A2 | S3 p11 |
| GWP-fossil, A1-A3 | 1.19E+02 per 1 m³ | kg CO2 eq. | EN 15804+A2 | S3 p11 |
| GWP-biogenic, A1-A3 | -7.91E+02 per 1 m³ | kg CO2 eq. | EN 15804+A2 | S3 p11 |
Reading note: the declared unit is 1 m³ of Kerto LVL at 500 kg/m³, an average across several Kerto products, with 2024 data from the Lohja and Punkaharju mills (S3 p5, p6). The negative A1 to A3 GWP-total comes from the biogenic carbon term (-7.91E+02 kg CO2 eq. per m³); the EPD main results table shows GWP-total in module C3 of about 8.71E+02 kg CO2 eq. per m³, which is that carbon released at end of life (S3 p11; the cached text extraction of this table is partly garbled, so confirm against the PDF). Read all modules together; A1 to A3 alone omits that release. The EPD mass of 500 kg/m³ differs from the DoP mean density of 510 kg/m³ (S1, S3); the EPD figure is an average across products.
Product Documents
| Document | Reference | Issued by | Status on 9 October 2026 | Link |
|---|---|---|---|---|
| Declaration of Performance, S-beam | MW/LVL/311-001/CPR/DOP, signed Espoo 10.7.2023; AVCP system 1; EN 14374:2004; notified body Eurofins Expert Services Oy No. 0809, certificate of constancy of performance 0809-CPR-1002 | Manufacturer-issued (notified body certification under system 1) | Opened | S1 |
| Declaration of Performance, Q-panel | MW/LVL/312-001/CPR/DOP, signed Espoo 10.7.2023; same notified body and certificate | Manufacturer-issued | Opened | S2 |
| Earlier DoP, S-beam | Version dated 19.12.2019 | Manufacturer-issued | Opened; S-beam values identical where compared; superseded by S1 | S6 |
| EPD | EPD-IES-0026805:001; ISO 14025 and EN 15804:2012+A2:2019/AC:2021; PCR 2019:14 v2.0.1 with c-PCR-006 v1.0.0; version date 2026-02-15, valid until 2031-02-15; EPD of multiple products (average) | Programme operator EPD International AB; independent third-party verifier | EPD document opened (manufacturer-hosted copy); Environdec. An older registration S-P-02802 appears in search results, not opened | S3 |
| Certificates and approvals sheet | Lists CE and UKCA marking; Eurofins product certificate EUFI29-20000676-C; Germany Z-9.1-847 and Z-9.1-291; Norway SINTEF TG 2142; USA ICC-ES ESR-3633 (S-beam) and ESR-4831 (Q-panel); Canada ESL-1606 and ESL-1605; Japan JAS JPIC-LV27; M1 emission classification; BM TRADA Q-Mark for door cores | Manufacturer-issued summary of third-party approvals | Sheet opened; none of the listed approvals opened at the issuing body. The file name reads 052023 but the footer reads 08/2025 | |
| PEFC and FSC chain of custody | PEFC logo licence PEFC/02-31-381; FSC licence code FSC-C209093 (Lohja and Punkaharju mills) | Certification bodies | Stated in S3 p3 and S4; PEFC and FSC registers not opened | |
| ETA | Not applicable (harmonised standard EN 14374 applies) | |||
| BBA, CodeMark, KOMO | Not found |
About Metsä Wood
- Company: Metsäliitto Cooperative, trading as Metsä Wood, part of Metsä Group; head office Revontulenpuisto 2, 02100 Espoo, Finland (S3 p3); DoP address P.O. Box 24, FI-08101 Lohja (S1).
- Production: Kerto LVL mills at Lohja, Punkaharju and Äänekoski, Finland; Äänekoski was in construction during the EPD data year (S3 p5).
- Availability: CE and UKCA marked, with national approvals in the USA, Norway, Canada, Germany and Japan (S4). Metsä Wood UK operates manufacturing and distribution sites at King's Lynn and Boston; the King's Lynn page does not say Kerto LVL is stocked there (S7).
- How to buy: the product page refers to a global sales network contact search; no named distributors (S5). Contact: https://www.metsagroup.com/metsawood/contacts/.
Sizes and Supply
| Item | Published |
|---|---|
| Thickness range, S-beam | 21 to 90 mm |
| Thickness range, Q-panel | 21 to 75 mm, with lay-ups listed |
| Widths, lengths, pack sizes, MOQ, lead time, price | not published |
Before You Specify
- Reaction to fire is D-s2, d0 (minimum 21 mm) or D-s1, d0 (minimum 27 mm, stated end-use conditions) only; check national rules for the building height, use and location of exposed timber.
- Apply the recommended reduction of fc,0,k (divide by 1.2) in service class 2, and design to EN 1995 with the values in the current DoP.
- Confirm the current DoP version in the Metsä Wood DoP library; two S-beam versions (2019 and 2023) are online.
4.
- Confirm it is the current registration rather than S-P-02802.
- The EPD is an average of several Kerto products; confirm it is accepted for the specific product in a project carbon assessment.
- Thermal conductivity was not found in any document opened.
- UK and Australian stocking routes, and any Australian certification, are not confirmed.
- The certificates sheet file name (052023) and footer (08/2025) differ; obtain the current sheet.
Similar Products
STEICOflex 036STEICO SE · Wood fibre battDeclared thermal conductivity, λD: 0.036 W/(m·K)Reaction to fire: Class E
Expanded Insulation Corkboard (ICB)Amorim Cork Solutions · Expanded cork boardThermal conductivity: 0.039 W/(m·K)Reaction to fire: Class E
SterlingOSB Zero OSB3West Fraser Europe · Oriented strand board (softwood)Product type and thickness range: OSB/3, over 6 mm to 32 mmReaction to fire, min 9 mm, no air gap behind: D-s2, d0
Source Documents
- S1: Declaration of Performance MW/LVL/311-001/CPR/DOP, Kerto LVL S-beam (10.7.2023)
- S2: Declaration of Performance MW/LVL/312-001/CPR/DOP, Kerto LVL Q-panel (10.7.2023)
- S3: EPD EPD-IES-0026805:001, International EPD System
- S4: Kerto LVL manual: certificates and approvals sheet
- S5: Product page
- S6: Earlier Declaration of Performance, Kerto LVL S-beam (19.12.2019)
- S7: UK site page (King's Lynn)