Skip to Content
EcoGaboonSource With Us

SterlingOSB Zero OSB3

West Fraser Europe · Oriented strand board (softwood)

A structural OSB/3 board for load-bearing use in humid conditions (S1, S2). The manufacturer describes it as made from UK-grown, FSC-certified timber strands bonded with a resin with no added formaldehyde (S2, S4).

Where It Is Used

  • DoP intended use: internal and external use as structural components in humid conditions; biological use classes 1 and 2 (S1).
  • Product page: flat and pitched roofs (including GRP roofing), wall sheathing, timber frame, flooring, sheds, portable buildings, caravans, agricultural buildings, hoardings, exhibition displays, built-in furniture, shelving, packaging, pallets, DIY and interior decorative use (S2).
  • BBA Product Sheet 6: loadbearing sheathing on timber-frame walls of domestic and non-domestic buildings (S5).
  • Stated restriction: the board does not achieve a reaction to fire classification of C-s2, d3 or better, and its use is restricted in some cases (S5 section 7).

Technical Specifications

Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.

PropertyValueUnitTest standardSource document
Product type and thickness rangeOSB/3, over 6 mm to 32 mmmmEN 13986:2004+A1:2015S1 p1
Bending strength fm (0 / 90), 6 to 10 mm18.0 / 9.0N/mm²EN 12369-1:2001S1 p1
Bending strength fm (0 / 90), 18 to 25 mm14.8 / 7.4N/mm²EN 12369-1:2001S1 p1
Mean bending stiffness Em (0 / 90)4930 / 1980N/mm²EN 12369-1:2001S1 p1
Panel shear fv6.8N/mm²EN 12369-1:2001S1 p1
Punching shear Fmax,k, T&G 15 / 18 / 22 mm2.64 / 4.12 / 4.96kNnot statedS1 p1
Reaction to fire, min 9 mm, no air gap behindD-s2, d0 (floorings Dfl-s1)EuroclassEN 13986; Commission Decision 2003/43/EC (as printed)S1 p2
Reaction to fire, any end use, min 3 mmE (floorings Efl)Euroclassas aboveS1 p2
Water vapour resistance factor, 15 mmdry 207 / wet 97µEN 12572:2001S1 p2
Thermal conductivity0.13W/(m·K)EN 13986S1 p2
Sound absorption0.1 (250 to 500 Hz); 0.25 (1000 to 2000 Hz)αEN 13986S1 p2
Formaldehyde releaseE0.5classnot statedS1 p2
Swelling in thickness15%not statedS1 p2
Mean density, sheathing grades 9 and 11 mmnot more than 600kg/m³not statedS5 p4
Biological use class1 and 2classEN 13986 (DoP)S1
GWP, A1-A3, current EN 15804+A2 EPDnot published: the current EPD was not openedkg CO2 eq. per m³EN 15804+A2

Reading note: the only EPD opened is the 2020 version of S-P-01850, which expired on 30 January 2025 and uses the older EN 15804 indicator set. Its values are listed only in the documentation table below, marked expired, and are not current data. The DoP is for Inverness OSB/3 generally and does not print the SterlingOSB Zero brand name (S1). The DoP gives different reaction to fire classes for boards mounted with air gaps behind; check the DoP table for the actual build-up.

Product Documents

DocumentReferenceIssued byStatus on 9 October 2026Link
Declaration of Performance (CE)WFOSB3DoPv13, signed Inverness 20 October 2025; AVCP system 2+; notified body 0502; EN 13986:2004+A1:2015Manufacturer-issued (with notified body factory production control certification under system 2+)Opened. Covers Inverness OSB/3; brand name not printedS1
UKCA Declaration of PerformanceWest-Fraser-Europe-Ltd-Inverness-UKCA-DoP-O3v5-EN.pdfManufacturer-issuedListed on the downloads page, not openedS9
UKOSB3DoPv1_E (2023)Reported to name West Fraser Europe nv, Genk, BelgiumManufacturer-issuedListed on the downloads page, not opened. Genk OSB/3 documents (including KOMO and Blue Angel) do not apply to SterlingOSB Zero from InvernessS9
EPD, 2020 version (EXPIRED)S-P-01850 "EPD for Oriented Strand Board", owner Norbord Europe Ltd; issued 31 January 2020, valid to 30 January 2025; modules A1 to A4; declared unit 1 m³ at 600 kg/m³ (Inverness). EXPIRED values, older indicator set, not for current use: GWP A1 -8.71E+02, A2 1.68E+01, A3 -7.19E+00 kg CO2 eq. per m³Programme operator: The International EPD System; independent verifierEPD document opened (copy on the Norwegian NOBB database). EXPIREDS8
BBA Agrément Certificate01/3857 Product Sheet 6 Issue 1 (sheathing), first issued 3 August 2022, amended 16 August 2023. Product Sheet 4 (flooring) and a roofing sheet are also listedBritish Board of AgrémentManufacturer-hosted copy of PS6 opened; BBA register not opened; PS4 and roofing sheet not opened
FSC chain of custodyMultisite certificate SA-COC-008109 (controlled wood SA-CW-008109), issued 07/04/2025, expiry 06/04/2030; Inverness site sub-code SA-COC-008109-CSoil Association CertificationManufacturer-hosted certificate and schedule copies opened; FSC database not opened
PEFC chain of custodyCertificate and product schedule 008109Listed on the downloads page, not opened
ETA, CodeMarkNot found

About West Fraser Europe

  • Company: West Fraser Europe Limited, formerly Norbord Europe Ltd; OSB production at Morayhill, Dalcross, Inverness IV2 7JQ, Scotland (S1). The FSC schedule gives a Cowie, Stirlingshire address for the certificate holder (S7); the OSB DoP and BBA certificate name Inverness (S1, S5).
  • Availability: UK and Europe (homepage summary); the factsheet is aimed at UK housebuilders (S4).
  • How to buy: through stockists and merchants; stockist finder https://uk.westfraser.com/stockists/ ; samples https://uk.westfraser.com/samples/ ; trade portal OnBord (S2). Contact: https://uk.westfraser.com/contact-us/.

Sizes and Supply

ItemPublished
Square edge sizes2400 x 1200 mm in 9, 11, 15 and 18 mm; 2440 x 1220 mm in 9, 11, 15, 18 and 22 mm; 2440 x 1200 mm in 9 mm; 2700 x 1200 mm in 9 mm
Sheets per pack100, 84, 60, 50 and 40 listed; the page does not clearly map each figure to a thickness
BBA sheathing sizes9 and 11 mm; 1200 x 2400, 1220 x 2440 and 1200 x 2700 mm
Tongue and groove sizesnot published: separate page not opened
MOQ, lead timeThe product page says minimum order quantities and lead times may apply; values not published
Pricenot published: not published

Before You Specify

  • Obtain the current EPD before any carbon assessment.
  • Reaction to fire is D-s2, d0 at best (minimum 9 mm, no air gap); the BBA certificate states the board does not achieve C-s2, d3 or better and its use is restricted in some cases. Check national rules for the building height and use.
  • OSB/3 is for humid conditions in biological use classes 1 and 2; it is not for exterior exposure without protection.
  • Check BBA certificate 01/3857 validity and scope on the BBA website.
  • Confirm that the Inverness DoP v13 is the one supplied with SterlingOSB Zero, since the brand name is not on the DoP; for UK projects obtain the UKCA DoP.
  • Do not use Genk (Belgium) OSB/3 documents for this product.
  • The DoP does not state density; the BBA certificate gives a mean density of not more than 600 kg/m³ for the 9 and 11 mm sheathing grades.
  • The site is Inverness for OSB; Cowie appears in West Fraser documents for other products and as the FSC certificate holder address.