Skip to Content
EcoGaboonSource With Us

Oriented Strand Board

Explore oriented strand board through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Oriented Strand Board

Why Oriented Strand Board

Properties from the listed products' own documents. Check each one against your project.

Product type and thickness range

OSB/3, over 6 mm to 32 mm mm. Test standard: EN 13986:2004+A1:2015

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Bending strength fm (0 / 90), 6 to 10 mm

18.0 / 9.0 N/mm². Test standard: EN 12369-1:2001

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Bending strength fm (0 / 90), 18 to 25 mm

14.8 / 7.4 N/mm². Test standard: EN 12369-1:2001

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Mean bending stiffness Em (0 / 90)

4930 / 1980 N/mm². Test standard: EN 12369-1:2001

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Panel shear fv

6.8 N/mm². Test standard: EN 12369-1:2001

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Punching shear Fmax,k, T&G 15 / 18 / 22 mm

2.64 / 4.12 / 4.96 kN. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Limitations and What to Check

Read the exact product and source before specifying.

SterlingOSB Zero OSB3

  • Obtain the current EPD before any carbon assessment.
  • Reaction to fire is D-s2, d0 at best (minimum 9 mm, no air gap); the BBA certificate states the board does not achieve C-s2, d3 or better and its use is restricted in some cases. Check national rules for the building height and use.
  • OSB/3 is for humid conditions in biological use classes 1 and 2; it is not for exterior exposure without protection.
  • Check BBA certificate 01/3857 validity and scope on the BBA website.
  • Confirm that the Inverness DoP v13 is the one supplied with SterlingOSB Zero, since the brand name is not on the DoP; for UK projects obtain the UKCA DoP.
  • Do not use Genk (Belgium) OSB/3 documents for this product.
  • The DoP does not state density; the BBA certificate gives a mean density of not more than 600 kg/m³ for the 9 and 11 mm sheathing grades.
  • The site is Inverness for OSB; Cowie appears in West Fraser documents for other products and as the FSC certificate holder address.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1234

SterlingOSB Zero OSB3

  • DoP intended use: internal and external use as structural components in humid conditions; biological use classes 1 and 2 (S1).
  • Product page: flat and pitched roofs (including GRP roofing), wall sheathing, timber frame, flooring, sheds, portable buildings, caravans, agricultural buildings, hoardings, exhibition displays, built-in furniture, shelving, packaging, pallets, DIY and interior decorative use (S2).
  • BBA Product Sheet 6: loadbearing sheathing on timber-frame walls of domestic and non-domestic buildings (S5).
  • Stated restriction: the board does not achieve a reaction to fire classification of C-s2, d3 or better, and its use is restricted in some cases (S5 section 7).
1. Structure 2. Walls 3. Roofs 4. Flooring

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
SterlingOSB Zero OSB3

Product type and thickness range: OSB/3, over 6 mm to 32 mm, EN 13986:2004+A1:2015 (DoP WFOSB3DoPv13 p1)

Reaction to fire, min 9 mm, no air gap behind: D-s2, d0 (DoP p2)

Formaldehyde release: E0.5 (DoP p2)

Full Specification

Related Materials

Manufacturers

West Fraser Europe

SterlingOSB Zero OSB3

Product type and thickness range: OSB/3, over 6 mm to 32 mm, EN 13986:2004+A1:2015 (DoP WFOSB3DoPv13 p1)

Reaction to fire, min 9 mm, no air gap behind: D-s2, d0 (DoP p2)

  • dop: Linked (WFOSB3DoPv13; brand name not printed on it)
  • epd: Expired version only (2020 EPD expired 30 January 2025; current not opened)
  • certificate: Certificate copy (BBA 01/3857 PS6, FSC SA-COC-008109; registers not opened)
  • installationGuide: Not checked

Current EPD not opened; 2020 EPD expired

About the Maker

Related Guides

Guides connected to oriented strand board through their material topics.

No published guides are connected to this material yet.

See all oriented strand board guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement