Skip to Content
EcoGaboonSource With Us

Expanded Cork Insulation

Explore expanded cork insulation through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Expanded Cork Insulation

Why Expanded Cork Insulation

Properties from the listed products' own documents. Check each one against your project.

Declared designation

ICB-EN 13170-L2-W2-T2-CS(10)100-TR50-WS-MU20-CC(0,8/0,4/10)5-AFr35. Test standard: EN 13170:2012

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p2

Thermal conductivity

0.039 (0.040 declared for ACERMI certification) W/(m·K). Test standard: EN 12667

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1, p2; S2

Density

110 ± 10 kg/m³. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Reaction to fire

Class E. Test standard: EN 13501-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2; S2

Compressive strength at 10% deformation

CS(10)100, at least 100 kPa. Test standard: EN 826

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Tensile strength perpendicular to faces

TR40, at least 40 (May 2026) vs TR50 (November 2024): versions disagree kPa. Test standard: EN 1607

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2; S2 p2

Limitations and What to Check

Read the exact product and source before specifying.

Expanded Insulation Corkboard (ICB)

  • No DoP found. EN 13170 is a harmonised standard, so a DoP should exist; obtain it from the manufacturer before specifying.
  • The two data sheet versions disagree on tensile strength (TR40 in May 2026, TR50 in November 2024) and on thermal resistance at 100 mm (2.55 vs 2.50 m²K/W). Confirm the declared values from the DoP and the PDA.
  • EPD biogenic carbon query: the EPD prints 4,554 kg C biogenic carbon for a 115 kg declared unit. Check the original on the EPD Hub register before citing GWP-total or biogenic figures.
  • Thermal conductivity is 0.039 W/(m·K) on the data sheets but 0.040 W/(m·K) is declared for ACERMI; the MDFacade sheet prints three values (0.043, 0.0426 and 0.045 W/(m·K)). Use the declared λD from a DoP for calculations.
  • Reaction to fire is Class E: check restrictions for external walls of relevant buildings in England (Approved Document B, regulation 7(2)) or the rules for the project's jurisdiction, including for MDFacade used as cladding.
  • The FSC certificate file on the site covers 2020 to 2024; check the current FSC register entry.
  • UK distribution is not stated by the manufacturer.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1234

Expanded Insulation Corkboard (ICB)

  • Data sheet May 2026: ETICS, ITICS, roofs, floors and interior insulation systems (S1 p1).
  • Data sheet November 2024: external and internal walls, slabs and floors, roofs and ceilings (S2).
  • Products page: applications include ventilated façade, double wall cavity, ETICS/EIFS, formwork insulation, floating slabs, flat and pitched roofs and radiant floors (S6).
  • MDFacade: exterior wall cladding and interior walls and ceilings with the cork exposed, fixed by adhesive or mechanically (S3).
  • Conditions of use: the data sheet gives typical values, is not a purchasing specification and does not imply suitability for a specific application; the contractual specification is a separate Product Specifications Sheet (PDA) available on request (S1 p2). No other exclusions were found.
1. Insulation 2. Walls 3. Roofs 4. Facades

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
Expanded Insulation Corkboard (ICB)

Thermal conductivity: 0.039 W/(m·K), EN 12667 (data sheets CTP-465/002 p1, p2 and CTP-465/001)

Reaction to fire: Class E, EN 13501-1 (CTP-465/002 p2; CTP-465/001)

Density: 110 ± 10 kg/m³ (CTP-465/002 p1)

Full Specification

Related Materials

Manufacturers

Amorim Cork Solutions

Expanded Insulation Corkboard (ICB)

Thermal conductivity: 0.039 W/(m·K), EN 12667 (data sheets CTP-465/002 p1, p2 and CTP-465/001)

Reaction to fire: Class E, EN 13501-1 (CTP-465/002 p2; CTP-465/001)

  • dop: Not published (none found)
  • epd: Linked (HUB-0281, valid to 13 February 2028
  • certificate: Not checked (ACERMI, FSC listed, not opened)
  • installationGuide: Not checked

Two data sheet versions disagree on other values; no DoP found

About the Maker

Related Guides

Guides connected to expanded cork insulation through their material topics.

No published guides are connected to this material yet.

See all expanded cork insulation guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement