Skip to Content
EcoGaboonSource With Us

Laminated Veneer Lumber

Explore laminated veneer lumber through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Laminated Veneer Lumber

Why Laminated Veneer Lumber

Properties from the listed products' own documents. Check each one against your project.

Strength class, S-beam

LVL 48 P, thickness 21 to 90 mm. Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Strength class, Q-panel

LVL 32 C (21 to 24 mm); LVL 36 C (27 to 75 mm). Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p3

Modulus of elasticity, parallel to grain

S-beam E0,mean 13800, E0,k 11600; Q-panel E0,mean 10000 (LVL 32 C) / 10500 (LVL 36 C) N/mm². Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2; S2 p3

Bending strength fm,0,edge,k (depth 300 mm)

S-beam 44.0; Q-panel 28.0 (LVL 32 C) / 32.0 (LVL 36 C) N/mm². Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2; S2 p3

Compression fc,0,k, S-beam

35.0 (divide by 1.2 in service class 2, as recommended) N/mm². Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Tension ft,0,k (length 3000 mm), S-beam

35.0 N/mm². Test standard: EN 14374:2004

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Limitations and What to Check

Read the exact product and source before specifying.

Kerto LVL S-beam and Q-panel

  • Reaction to fire is D-s2, d0 (minimum 21 mm) or D-s1, d0 (minimum 27 mm, stated end-use conditions) only; check national rules for the building height, use and location of exposed timber.
  • Apply the recommended reduction of fc,0,k (divide by 1.2) in service class 2, and design to EN 1995 with the values in the current DoP.
  • Confirm the current DoP version in the Metsä Wood DoP library; two S-beam versions (2019 and 2023) are online.

4.

  • Confirm it is the current registration rather than S-P-02802.
  • The EPD is an average of several Kerto products; confirm it is accepted for the specific product in a project carbon assessment.
  • Thermal conductivity was not found in any document opened.
  • UK and Australian stocking routes, and any Australian certification, are not confirmed.
  • The certificates sheet file name (052023) and footer (08/2025) differ; obtain the current sheet.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

123

Kerto LVL S-beam and Q-panel

  • DoP intended use: buildings and bridges (S1, S2).
  • EPD: load-bearing and non-load-bearing structures such as beams, headers, studs, columns and panels for roof, wall and floor elements (S3 p5).
  • Product page: beams and headers, lintels, floor joists, rafters and ridge beams, truss chords, studs and columns, portal frames, element components, industrial components such as doors and windows, concrete formwork and scaffolding (S5).
  • Conditions of use: DoP values are for structural design to EN 1995 (Eurocode 5); in service class 2 the S-beam compression value fc,0,k of 35.0 N/mm² is recommended to be divided by 1.2 (S1 footnote).
1. Structure 2. Walls 3. Roofs

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
Kerto LVL S-beam and Q-panel

Strength class, S-beam: LVL 48 P, thickness 21 to 90 mm, EN 14374:2004 (DoP MW/LVL/311-001 p2)

Density, mean / 5th percentile: 510 / 480 kg/m³ (DoP S-beam p2; DoP Q-panel p3)

Reaction to fire, min 21 mm: D-s2, d0 (DoP S-beam p3; DoP Q-panel p4)

Full Specification

Related Materials

Manufacturers

Metsä Wood

Kerto LVL S-beam and Q-panel

Strength class, S-beam: LVL 48 P, thickness 21 to 90 mm, EN 14374:2004 (DoP MW/LVL/311-001 p2)

Density, mean / 5th percentile: 510 / 480 kg/m³ (DoP S-beam p2; DoP Q-panel p3)

  • dop: Linked (MW/LVL/311-001 and 312-001)
  • epd: Linked (EPD-IES-0026805:001, valid to 2031-02-15
  • certificate: Not checked (approvals listed, not opened)
  • installationGuide: Not checked
About the Maker

Related Guides

Guides connected to laminated veneer lumber through their material topics.

No published guides are connected to this material yet.

See all laminated veneer lumber guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement