Marmoleum Marbled sheet linoleum
Forbo Flooring · Linoleum sheet on jute backing
A sheet floor covering made mainly from linseed oil, gum rosin, wood flour, calcium carbonate and pigments on a jute backing, with a Topshield Pro factory finish (S2, S4). The EPD composition table lists linseed oil 25%, gum rosin 5%, wood flour 23%, calcium carbonate 21%, recycled Marmoleum 14% (pre- and post-consumer), titanium dioxide 2%, other pigments 1%, jute 8% and lacquer 1% (S4 p8).
Where It Is Used
- DoP intended use: floor covering in buildings (EN 14041), according to the manufacturer's specifications (S3).
- Use classes stated: domestic Class 23; commercial Class 32 (2.0 mm) or Class 34 (2.5 and 3.2 mm); light industrial Class 41 (2.0 mm) or Class 43 (2.5 and 3.2 mm) (S2).
- Stated as suitable for office chairs with castors and for underfloor heating (S2).
- Stated restrictions: not resistant to prolonged exposure to alkalis (S2). The Bfl-s1 fire version is available for 2.5 mm on request only (S2).
Technical Specifications
Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.
Values are for 2.5 mm unless stated.
| Property | Value | Unit | Test standard | Source document |
|---|---|---|---|---|
| Total thickness | 2.0 / 2.5 / 3.2 | mm | EN ISO 24346 | S2 p1 |
| Use class, commercial and light industrial | Class 34 and Class 43 (2.5 and 3.2 mm); Class 32 and Class 41 (2.0 mm) | class | EN ISO 10874 | S2 p1 |
| Reaction to fire | Cfl-s1 (standard); Bfl-s1 for 2.5 mm on request | class | EN 13501-1 | S2 p1 |
| Total weight, typical | 2900 (2.5 mm); 2300 (2.0 mm); 3900 (3.2 mm) | g/m² | EN ISO 23997 | S2 p1 |
| Residual indentation | ≤ 0.15 (typical about 0.08) | mm | EN ISO 24343-1 | S2 p1 |
| Flexibility | ø 40 (2.5 mm) | mm | EN ISO 24344 | S2 p1 |
| Slip resistance | R9; μ ≥ 0.30 | class | DIN 51130; EN 13893 | S2 p1 |
| Impact sound reduction | ≤ 4 (2.0 mm); ≤ 5 (2.5 mm); ≤ 6 (3.2 mm) | dB | EN ISO 717-2 | S2 p1 |
| Thermal conductivity (printed in the specification as "Thermal resistance") | 0.17 | W/(m·K) | EN 12524 | S2 p1; S3 |
| TVOC at 28 days | < 0.05 | mg/m³ | EN 16516 | S2 p1 |
| Body voltage | ≤ 2 | kV | EN 1815 | S2 p1 |
| GWP-total, A1-A3, 2.5 mm | -1.57 per m² installed | kg CO2 eq. | EN 15804+A2; EN 16810 | S4 p16, Table 3 |
| GWP-fossil, A1-A3, 2.5 mm | 2.83 per m² | kg CO2 eq. | EN 15804+A2; EN 16810 | S4 p16, Table 3 |
| GWP-biogenic, A1-A3, 2.5 mm | -4.40 per m² | kg CO2 eq. | EN 15804+A2; EN 16810 | S4 p16, Table 3 |
| GWP-total, end of life, 2.5 mm | C3/1 incineration 4.44; C4/2 landfill 4.51 per m² | kg CO2 eq. | EN 15804+A2; EN 16810 | S4 p16, Table 3 |
| GWP-total, A1-A3, 2.0 mm / 3.2 mm | -1.27 / -2.02 per m² | kg CO2 eq. | EN 15804+A2; EN 16810 | S4 p17, Tables 4 and 5 |
Reading note: the functional unit is 1 m² of installed product with a use stage of one year (S4). The negative A1 to A3 results come from biogenic carbon taken up by the linseed oil, gum rosin, wood flour and jute. Under the EN 15804+A2 approach this carbon is released again at end of life, in module C3/1 (100% incineration scenario) or C4/2 (100% landfill scenario), which is why the end-of-life GWP-total for 2.5 mm is about +4.4 to +4.5 kg CO2 eq. per m² (S4 p16). Read all modules together; A1 to A3 alone omits that release.
Product Documents
| Document | Reference | Issued by | Status on 9 October 2026 | Link |
|---|---|---|---|---|
| Declaration of Performance | 0100201-DoP-306, "Marmoleum, Artoleum 2.0-2.5-3.2 mm (EN-ISO 24011)"; EN 14041:2004/AC:2006; AVCP System 3; notified laboratory University Gent (1611); signed Assendelft 30-6-2013 | Manufacturer-issued | Opened; dated 2013; only thermal conductivity (0.17 W/m.K) was readable as text, other declared values did not extract | S3 |
| EPD | "Marmoleum sheet 2.0/2.5/3.2 mm", declaration number 4792152997.101.1; EN 15804+A2 with PCR EN 16810; date of issue 23 March 2026; period of validity 5 years (file name gives expiry 2031.03.23); externally verified by UL Solutions; LCA verified by Industrial Ecology Consultants | Programme operator UL Solutions; independent verifiers | EPD document opened (manufacturer-hosted copy); UL SPOT | S4 |
| Health Product Declaration (expiry 2027.05.03) and Allergy UK certificate (April 2026) | Listed on UK downloads page | Third parties | Not opened | S1 |
| PEFC (wood flour) | Stated in specification; no licence code seen | Register not opened; not published | S2 | |
| ETA, BBA, CodeMark, UK DoP | Not found | not published |
About Forbo Flooring
- Company: Forbo Flooring B.V., Industrieweg 12, 1566 JP Assendelft, The Netherlands (S3). UK sales: Forbo Flooring UK Limited (S2). Manufacturing in Assendelft and Kirkcaldy per the EPD (S4).
- Availability: UK and Irish Forbo sites (S1). The Australian site lists other Marmoleum ranges, but Marmoleum Marbled was not confirmed on the Australian home page (not published for Australia) (S5).
- How to buy: UK sales support by the phone line and email printed on the specification, web forbo-flooring.co.uk/marbled (S2). Australia: where-to-buy page https://www.forbo.com/flooring/en-au/where-to-buy/puow5x (S5).
Sizes and Supply
| Item | Published |
|---|---|
| Roll format | 2.00 m wide, up to 33 m long; 2.0, 2.5 and 3.2 mm |
| Collection size | 29 colours (2.0 mm); 90 colours (2.5 mm); 8 colours (3.2 mm) |
| Bfl-s1 version | 2.5 mm on request; lead time from sales support |
| Price, MOQ, lead time, adhesive | not published: not published; recommended adhesives are listed on the manufacturer's installation page |
Before You Specify
- The standard reaction to fire class is Cfl-s1; Bfl-s1 is available for 2.5 mm on request only. Check the class required for the room use and escape routes under national rules.
- The DoP opened is dated 30-6-2013 and its declared values for reaction to fire, slip resistance and formaldehyde could not be read as text. Obtain the current DoP and any UK DoP.
- The specification prints "Thermal resistance" with the unit W/m·K; the DoP declares the same 0.17 value as thermal conductivity. Treat 0.17 W/(m·K) as conductivity and confirm for underfloor heating design.
- Not resistant to prolonged exposure to alkalis; check substrate moisture and pH and use the recommended adhesive (the EPD A5 module includes adhesive).
- The EPD names plants in Assendelft and Kirkcaldy but describes electricity modelling for Assendelft; confirm which plant supplies the project.
- Availability of Marmoleum Marbled outside the UK and Ireland was not confirmed in the documents opened.
- The EPD uses a one-year use stage; whole-life assessments need the project's own service life and replacement assumptions.
