Skip to Content
EcoGaboonSource With Us

Linoleum

Explore linoleum through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Linoleum

Why Linoleum

Properties from the listed products' own documents. Check each one against your project.

Total thickness

2.0 / 2.5 / 3.2 mm. Test standard: EN ISO 24346

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Use class, commercial and light industrial

Class 34 and Class 43 (2.5 and 3.2 mm); Class 32 and Class 41 (2.0 mm) class. Test standard: EN ISO 10874

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Reaction to fire

Cfl-s1 (standard); Bfl-s1 for 2.5 mm on request class. Test standard: EN 13501-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Total weight, typical

2900 (2.5 mm); 2300 (2.0 mm); 3900 (3.2 mm) g/m². Test standard: EN ISO 23997

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Residual indentation

≤ 0.15 (typical about 0.08) mm. Test standard: EN ISO 24343-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Flexibility

ø 40 (2.5 mm) mm. Test standard: EN ISO 24344

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p1

Limitations and What to Check

Read the exact product and source before specifying.

Marmoleum Marbled sheet linoleum

  • The standard reaction to fire class is Cfl-s1; Bfl-s1 is available for 2.5 mm on request only. Check the class required for the room use and escape routes under national rules.
  • The DoP opened is dated 30-6-2013 and its declared values for reaction to fire, slip resistance and formaldehyde could not be read as text. Obtain the current DoP and any UK DoP.
  • The specification prints "Thermal resistance" with the unit W/m·K; the DoP declares the same 0.17 value as thermal conductivity. Treat 0.17 W/(m·K) as conductivity and confirm for underfloor heating design.
  • Not resistant to prolonged exposure to alkalis; check substrate moisture and pH and use the recommended adhesive (the EPD A5 module includes adhesive).
  • The EPD names plants in Assendelft and Kirkcaldy but describes electricity modelling for Assendelft; confirm which plant supplies the project.
  • Availability of Marmoleum Marbled outside the UK and Ireland was not confirmed in the documents opened.
  • The EPD uses a one-year use stage; whole-life assessments need the project's own service life and replacement assumptions.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1

Marmoleum Marbled sheet linoleum

  • DoP intended use: floor covering in buildings (EN 14041), according to the manufacturer's specifications (S3).
  • Use classes stated: domestic Class 23; commercial Class 32 (2.0 mm) or Class 34 (2.5 and 3.2 mm); light industrial Class 41 (2.0 mm) or Class 43 (2.5 and 3.2 mm) (S2).
  • Stated as suitable for office chairs with castors and for underfloor heating (S2).
  • Stated restrictions: not resistant to prolonged exposure to alkalis (S2). The Bfl-s1 fire version is available for 2.5 mm on request only (S2).
1. Flooring

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
Marmoleum Marbled sheet linoleum

Total thickness: 2.0 / 2.5 / 3.2 mm, EN ISO 24346 (technical specification v4 p1)

Use class, commercial: Class 34 (2.5 and 3.2 mm); Class 32 (2.0 mm), EN ISO 10874 (specification p1)

Reaction to fire: Cfl-s1 (standard); Bfl-s1 for 2.5 mm on request, EN 13501-1 (specification p1)

Full Specification

Related Materials

Manufacturers

Forbo Flooring

Marmoleum Marbled sheet linoleum

Total thickness: 2.0 / 2.5 / 3.2 mm, EN ISO 24346 (technical specification v4 p1)

Use class, commercial: Class 34 (2.5 and 3.2 mm); Class 32 (2.0 mm), EN ISO 10874 (specification p1)

  • dop: Linked (0100201-DoP-306, 2013)
  • epd: Linked (4792152997.101.1, issued 23 March 2026
  • certificate: Not checked
  • installationGuide: Not checked

DoP dated 2013 and partly unreadable as text

About the Maker

Related Guides

Guides connected to linoleum through their material topics.

No published guides are connected to this material yet.

See all linoleum guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement