Skip to Content
EcoGaboonSource With Us

Accoya wood

Accsys Technologies · Acetylated softwood

Solid softwood modified through to the core by the manufacturer's patented acetylation process (S1). It is supplied as sawn stock in set grades and lengths, which processors machine into cladding, decking and joinery profiles (S1).

Where It Is Used

From the data sheet (S1):

  • Cladding, decking, windows, doors and other exterior joinery made by processors from sawn stock; the manufacturer runs a training programme for companies making Accoya products and recommends that they take part.
  • Ground contact and salt water contact are discussed with field test results; the data sheet reports some marine organism attack in long immersion tests.

Stated conditions (S1):

  • Use corrosion-proof stainless steel fixings (A2 or A4 to EN 10088-1).
  • Adhesives: PU, EPI, epoxy and PRF give the best results; PVAc results vary; MUF should be avoided.
  • Fire: Euroclass D like most softwoods; fire treatment is needed to meet higher requirements.

Technical Specifications

Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.

PropertyValueUnitTest standardSource document
DurabilityClass 1EN 350S1 p2
Densityaverage 510 (range 400 to 600) at 65% RH, 20 °Ckg/m³not statedS1 p2
Equilibrium moisture content3 to 5 at 65% RH, 20 °C%not statedS1 p2
Shrinkage, wet to 65% RHradial 0.4; tangential 0.8 (average)%not statedS1 p2
Shrinkage, wet to oven dryradial 0.7; tangential 1.5 (average)%not statedS1 p2
Thermal conductivity0.12W/(m·K)EN 12667S1 p2
Reaction to fireD (Europe); Class C (USA)EN 13501-1 (printed as "EN149915"); ASTM E84S1 p2
Strength gradeA1 grade C22; A2 grade C16not stated (EN 338 classes)S1 p1, p2
Bending stiffness8800N/mm²EN 408S1 p2
Janka hardnessside 4100; end grain 6600NASTM D143S1 p2
Brinell hardness2.4not printedEN 1534 (2010)S1 p2
Standard lengths2.4, 3.0, 3.6, 4.2, 4.8 (intermediate lengths 1.8 to 4.5 at lower volume; finger-jointed 4.2, 4.8, 6.0)mS1 p1
Sawn thicknesses25, 32, 38, 50, 63, 75, 100 (rough sawn, actual)mmS1 p1
Sawn widths100, 125, 150, 200 (not every combination)mmS1 p1
GWP, A1-A3not taken: no Accsys EPD opened today (not published)EN 15804

Product Documents

DocumentReferenceIssued byStatus on 9 October 2026Link
Data sheetAccoya data sheet, copyright 2020ManufacturerOpened (distributor-hosted copy)S1
EPD for a distributor's cladding productEPD-IES-0013617:003 (S-P-13617), "James Latham Accoya® Cladding uncoated", owner James Latham, PCR 2019:14 (EN 15804+A2), version date 2024-07-08, valid to 2029-04-30, status ValidInternational EPD System (register entry opened)Register entry opened:. Owner is the distributor, not Accsys
FSC chain of custodyDistributor page states "FSC mixed source" for its Accoya cladding; no licence code shownDistributor statementCertificate and FSC register not opened (licence code not published)
DoPNot applicable as a harmonised product in the documents opened; not found
BBA, ETA, CodeMarkNot found

About Accsys Technologies

  • Company: Accsys Technologies, trading name of Titan Wood Limited (S1).
  • Availability: the data sheet refers to projects worldwide and to field tests in Australia, Japan, New Zealand and the USA (S1). UK supply through distributors such as International Timber (S3) and James Latham (owner of the cladding EPD, S2).
  • How to buy: through timber distributors and Accoya processors (S1, S3).

Sizes and Supply

ItemPublished
GradesA1, FJ/A1, A2, B
Lengths and sawn sizesAs in section 3
Distributor ordering routesRequest a sample, request a quote, open an account (International Timber); supplied rough sawn; distributor lists a 15% wastage allowance
Price, MOQ, lead timenot published

Before You Specify

  • Obtain the current Accsys data sheet and Wood Information Guide; the copy opened is dated 2020.
  • Reaction to fire is Euroclass D untreated; check the façade fire requirements for the building and jurisdiction, and the classification of any fire-treated version.
  • Confirm FSC chain of custody for the supply chain (manufacturer, distributor and processor) if certified timber is specified.
  • If an EPD is needed, confirm which EPD matches the actual product supplied (the opened register entry is owned by one distributor).
  • Follow the fixing and adhesive guidance; mild steel fixings are not recommended.