Redland Cambrian Interlocking Slate
BMI Redland · Resin-bonded reconstituted slate
A resin-based reconstituted slate made from glass fibre reinforced polyester resin, crushed slate and fillers, shaped to look like riven natural slate (S2). The manufacturer states it is engineered using reclaimed natural Welsh slate (S1).
Where It Is Used
As stated (S1, S2):
- Pitched timber roofs with a rafter pitch of 15° or more (75 mm headlap at 15°; 50 mm at 25°), up to 90° subject to fixing specification.
- Vertical cladding on the outer face of external walls.
Stated restrictions (S2, 2020 certificate):
- Roof use is unrestricted for external fire spread (EXT.S.AA to BS 476-3).
- As wall cladding the certificate gives a Class 2 surface (BS 476-6 and BS 476-7) and limits use in England, Wales and Northern Ireland to walls less than 18 m above ground and 1 m or more from the relevant boundary; in Scotland, to buildings with no storey more than 11 m above ground and more than 1 m from the boundary.
- The certificate holder had not declared a reaction to fire class to BS EN 13501-1. Building regulations on combustible materials in external walls have changed since 2020: check current requirements before any wall use.
- Minimum pitch assumes a maximum rafter length of 10 m; longer rafters need technical advice (S1).
- The certificate warns of reduced life in areas of high alkali pollution (S2).
Technical Specifications
Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.
| Property | Value | Unit | Test standard | Source document |
|---|---|---|---|---|
| Size (overall) | 330 x 336 | mm | S1 | |
| Linear cover of one slate | 300 | mm | S1 | |
| Minimum pitch and headlap | 15° at 75 mm; 25° at 50 mm | BS 5534 design basis | S1 | |
| Maximum pitch | 90 (subject to fixing specification) | ° | S1 | |
| Headlap range | 50 to 90 | mm | S1 | |
| Batten gauge | minimum 210; maximum 225 below 25°, 250 at 25° and over | mm | S1 | |
| Covering capacity | 14.8 at 225 mm gauge; 13.3 at 250 mm gauge | slates/m² | S1 | |
| Weight on roof | 18 at 225 mm gauge; 17 at 250 mm gauge (BBA: 17 to 20 depending on gauge) | kg/m² | S1; S2 | |
| Weight per 1000 slates | 1.24 | tonnes | S1 | |
| External fire (roof) | EXT.S.AA | BS 476-3:2004 | S2 s7.1 | |
| Surface spread of flame / fire propagation | Class 2 surface; fire propagation index 12.3, sub-index 0.1 | BS 476-6, BS 476-7 | S2 s7.2 | |
| Reaction to fire (Euroclass) | not declared (not published) | BS EN 13501-1 | S2 s7.4 | |
| Service life | in excess of 60 years under normal service conditions | years | BBA assessment | S2 s10.1 |
| Wind-driven rain | adequate resistance at 15° pitch | BBA tests | S2 s8.1 | |
| Recycled slate content | not quantified in the documents opened (not published) | % | ||
| Fixings | 30 x 2.65 mm stainless steel annular ring-shank nails; eaves, verge and slate clips | S1 |
Product Documents
| Document | Reference | Issued by | Status on 9 October 2026 | Link |
|---|---|---|---|---|
| BBA Agrément Certificate | 87/1907 Product Sheet 1, originally certificated 4 September 1987, second issue 17 March 2020 | British Board of Agrément (independent) | Merchant-hosted copy opened; BBA. Search results indicated a 2024 version listed on the BMI product page, not opened. Treat 2020 values as superseded until the current issue is checked | S2 |
| Technical data sheet | RED_TDS_2203 | Manufacturer | Opened (merchant-hosted copy) | S1 |
| Declaration of Performance | Data sheet says DoPs are on the manufacturer's website; the data sheet also says there is no British standard for Cambrian slate | Manufacturer | Not located (not published) | S1 |
| EPD | Not found | not published |
About BMI Redland
- Company: BMI Group UK Limited, BMI House, 2 Pitfield, Kiln Farm, Milton Keynes MK11 3LW (S1).
- Availability: UK (UK documents and BBA certificate); no other markets stated in the documents opened.
- How to buy: through roofing merchants (copies of the data sheet and certificate are hosted by merchants); samples can be ordered via the QR code route on the data sheet (S1). Technical services contact is printed on the data sheet (S1).
Sizes and Supply
| Item | Published |
|---|---|
| Pack and pallet | 10 slates per pack; 60 packs per pallet; 600 slates per pallet; about 0.76 tonnes per pallet including pallet |
| Colours | Heather, Langdale Green, Slate Grey, Slate Grey pre-weathered (product codes printed) |
| Price, lead time | not published: not published by the manufacturer in documents opened (merchant prices exist but were not collected) |
Before You Specify
- Confirm the current BBA issue and scope on the BBA register; the copy opened is from 2020.
- For wall cladding, check current building regulations on combustible materials in external walls; the product has no declared Euroclass in the 2020 certificate.
- Obtain a BS 5534 fixing specification for the site's wind exposure (the data sheet refers to the manufacturer's fixing calculation tool).
- Ask for the recycled slate share and any EPD if the project needs them; neither is published in the documents opened.
- Use the system accessories listed by the manufacturer; the certificate covers the supplied nails and clips only.
Similar Products
STEICOflex 036STEICO SE · Wood fibre battDeclared thermal conductivity, λD: 0.036 W/(m·K)Reaction to fire: Class E
Expanded Insulation Corkboard (ICB)Amorim Cork Solutions · Expanded cork boardThermal conductivity: 0.039 W/(m·K)Reaction to fire: Class E
Kerto LVL S-beam and Q-panelMetsä Wood · Laminated veneer lumber (softwood)Strength class, S-beam: LVL 48 P, thickness 21 to 90 mmDensity, mean / 5th percentile: 510 / 480 kg/m³