Skip to Content
EcoGaboonSource With Us

Acetylated Timber

Explore acetylated timber through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Acetylated Timber

Why Acetylated Timber

Properties from the listed products' own documents. Check each one against your project.

Durability

Class 1. Test standard: EN 350

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Density

average 510 (range 400 to 600) at 65% RH, 20 °C kg/m³. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Equilibrium moisture content

3 to 5 at 65% RH, 20 °C %. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Shrinkage, wet to 65% RH

radial 0.4; tangential 0.8 (average) %. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Shrinkage, wet to oven dry

radial 0.7; tangential 1.5 (average) %. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Thermal conductivity

0.12 W/(m·K). Test standard: EN 12667

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p2

Limitations and What to Check

Read the exact product and source before specifying.

Accoya wood

  • Obtain the current Accsys data sheet and Wood Information Guide; the copy opened is dated 2020.
  • Reaction to fire is Euroclass D untreated; check the façade fire requirements for the building and jurisdiction, and the classification of any fire-treated version.
  • Confirm FSC chain of custody for the supply chain (manufacturer, distributor and processor) if certified timber is specified.
  • If an EPD is needed, confirm which EPD matches the actual product supplied (the opened register entry is owned by one distributor).
  • Follow the fixing and adhesive guidance; mild steel fixings are not recommended.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1

Accoya wood

From the data sheet (S1):

  • Cladding, decking, windows, doors and other exterior joinery made by processors from sawn stock; the manufacturer runs a training programme for companies making Accoya products and recommends that they take part.
  • Ground contact and salt water contact are discussed with field test results; the data sheet reports some marine organism attack in long immersion tests.

Stated conditions (S1):

  • Use corrosion-proof stainless steel fixings (A2 or A4 to EN 10088-1).
  • Adhesives: PU, EPI, epoxy and PRF give the best results; PVAc results vary; MUF should be avoided.
  • Fire: Euroclass D like most softwoods; fire treatment is needed to meet higher requirements.
1. Facades

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
Accoya wood

Durability: Class 1, EN 350 (data sheet, 2020, p2)

Density: average 510 kg/m³ (range 400 to 600) at 65% RH, 20 °C (data sheet p2)

Reaction to fire: D (Europe) (data sheet p2)

Full Specification

Related Materials

Manufacturers

Accsys Technologies

Accoya wood

Durability: Class 1, EN 350 (data sheet, 2020, p2)

Density: average 510 kg/m³ (range 400 to 600) at 65% RH, 20 °C (data sheet p2)

  • dop: Not published (not found)
  • epd: Distributor's only (EPD for a distributor's cladding product, register-confirmed; not an Accsys EPD)
  • certificate: Not checked
  • installationGuide: Not checked

Data sheet dated 2020, distributor-hosted copy

About the Maker

Related Guides

Guides connected to acetylated timber through their material topics.

No published guides are connected to this material yet.

See all acetylated timber guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement