Skip to Content
EcoGaboonSource With Us

Blast Furnace Cement

Explore blast furnace cement through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Blast Furnace Cement

Why Blast Furnace Cement

Properties from the listed products' own documents. Check each one against your project.

Cement type and strength class

CEM III/A 42,5N. Test standard: BS EN 197-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Compressive strength, 1 day (typical)

8 MPa. Test standard: not stated (EN 196-1 is the usual method; not printed)

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Compressive strength, 2 days (typical)

15 MPa. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Compressive strength, 7 days (typical)

26 MPa. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Compressive strength, 28 days (typical)

51 MPa. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Setting time (typical)

230 (data sheet); the product page states 180 minutes. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1; S3

Limitations and What to Check

Read the exact product and source before specifying.

ECOPlanet Endure CEM III/A 42,5N

  • Obtain the DoP and confirm the declared (not typical) strength and chemical values.
  • The two Holcim sources give different setting times (230 minutes on the data sheet, 180 on the product page); ask which applies.
  • Obtain the EPD named for Cauldon Endure and check whether it covers bulk as well as bagged supply (only "Bagged" is listed on S4).
  • Confirm sulfate-resisting classification for the project's design chemical class with the concrete producer under BS 8500 and BRE SD1.
  • Ask for the GGBS proportion if a project LCA or specification needs it.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1

ECOPlanet Endure CEM III/A 42,5N

As stated by the manufacturer (S1, S3):

  • High exposure class precast concrete products, drainage products and below-ground precast.
  • Piling, volumetric concrete production and below-ground concrete works.
  • The data sheet says it can be used across all exposure classes, and that it can be classified as CEM III/A+SR when used in accordance with BS 8500 and BRE SD1 (S1).

Stated conditions (S1): use correct materials, proportions, water content, compaction, curing and protection; trials are recommended when changing cement source; additions such as fly ash or GGBS affect strength and workability.

1. Structure

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
ECOPlanet Endure CEM III/A 42,5N

Cement type and strength class: CEM III/A 42,5N, BS EN 197-1 (data sheet, bulk, May 2025 p1)

Compressive strength, 28 days (typical): 51 MPa (data sheet p1)

Declared mean alkali content: 0.65% (data sheet p1)

Full Specification

Related Materials

Manufacturers

Holcim UK

ECOPlanet Endure CEM III/A 42,5N

Cement type and strength class: CEM III/A 42,5N, BS EN 197-1 (data sheet, bulk, May 2025 p1)

Compressive strength, 28 days (typical): 51 MPa (data sheet p1)

  • dop: On request (not located)
  • epd: On request (behind a request form)
  • certificate: Not checked
  • installationGuide: Not checked

Typical values, not declared; setting time differs between sources

About the Maker

Related Guides

Guides connected to blast furnace cement through their material topics.

No published guides are connected to this material yet.

See all blast furnace cement guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement