Skip to Content
EcoGaboonSource With Us

ECOPlanet Endure CEM III/A 42,5N

Holcim UK · Blast furnace cement (CEM III/A)

A CEM III/A 42,5N blast furnace cement conforming to BS EN 197-1, supplied factory blended (S1, S3). The manufacturer positions it for concrete needing resistance to sulfate and chloride ingress with relatively high early strength, particularly precast products (S1).

Where It Is Used

As stated by the manufacturer (S1, S3):

  • High exposure class precast concrete products, drainage products and below-ground precast.
  • Piling, volumetric concrete production and below-ground concrete works.
  • The data sheet says it can be used across all exposure classes, and that it can be classified as CEM III/A+SR when used in accordance with BS 8500 and BRE SD1 (S1).

Stated conditions (S1): use correct materials, proportions, water content, compaction, curing and protection; trials are recommended when changing cement source; additions such as fly ash or GGBS affect strength and workability.

Technical Specifications

Values from the maker's documents listed at the end of this page. Check the current version with the maker before you specify.

Values are typical performance as printed in the data sheet, not declared characteristic values.

PropertyValueUnitTest standardSource document
Cement type and strength classCEM III/A 42,5NBS EN 197-1S1 p1
Compressive strength, 1 day (typical)8MPanot stated (EN 196-1 is the usual method; not printed)S1 p1
Compressive strength, 2 days (typical)15MPanot statedS1 p1
Compressive strength, 7 days (typical)26MPanot statedS1 p1
Compressive strength, 28 days (typical)51MPanot statedS1 p1
Setting time (typical)230 (data sheet); the product page states 180minutesnot statedS1 p1; S3
Declared mean alkali content0.65%not statedS1 p1
Declared maximum chloride content0.09%not statedS1 p1
GGBS contentnot printed on the data sheet opened (not published)%
ColourLight greyS3
GWP, A1-A3not available: cement EPDs are behind a gated form (not published)EN 15804S4

Product Documents

DocumentReferenceIssued byStatus on 9 October 2026Link
Declaration of Performance (UKCA)Not located on the product page; the site has a UKCA marking and DoP sectionManufacturer-issuedNot opened (not published)https://www.holcim.co.uk/news-and-resources/technical-information/ukca-marking
UKCA markingStated: cement range carries the UKCA mark with third-party accreditationManufacturer statementCertificate not openedS1
EPD"Cauldon, Ecoplanet Endure Bagged 15804" listed; the EPD index states cement EPDs follow ISO 14025, ISO 21930 and EN 15804Programme operator not named on the index pageGated behind a contact form; not opened. EcoGaboon did not submit personal data to obtain itS4
BES 6001 responsible sourcing"Very Good" rating stated for major product groupsCertificate issued by a third partyCertificate not openedS1 p2
Management systemsOHS 61759, FM 96927, EMS 96928 printed on the data sheetThird-party certificatesNot openedS1

About Holcim UK

  • Company: Holcim UK, Cauldon Cement Works, Yelsway Lane, Stoke-on-Trent, Staffordshire ST10 3EQ (S1).
  • Availability: produced in the UK "for local supply" (S1); a national distribution network is mentioned on the product page (S3). No export markets are stated.
  • How to buy: bulk loads delivered by tanker to sites with suitable access and a safe discharge point (S1); 25 kg bags (S2). Contact routes: product page and contact page (S3, https://www.holcim.co.uk/contact-us).

Sizes and Supply

ItemPublished
FormatsBulk tanker; 25 kg bags
StorageSilo (bulk); cool dry place (bagged)
SamplesAvailable on request for trial work
Price, MOQ, lead timenot published: not published

Before You Specify

  • Obtain the DoP and confirm the declared (not typical) strength and chemical values.
  • The two Holcim sources give different setting times (230 minutes on the data sheet, 180 on the product page); ask which applies.
  • Obtain the EPD named for Cauldon Endure and check whether it covers bulk as well as bagged supply (only "Bagged" is listed on S4).
  • Confirm sulfate-resisting classification for the project's design chemical class with the concrete producer under BS 8500 and BRE SD1.
  • Ask for the GGBS proportion if a project LCA or specification needs it.