Skip to Content
EcoGaboonSource With Us

Ground Granulated Blast Furnace Slag

Explore ground granulated blast furnace slag through the listed products and the documents behind their declared properties. Product suitability and supply must be confirmed for the project.

Products
1
Manufacturers
1
Last Checked
9 October 2026
Request Product Documents or Samples
Ground Granulated Blast Furnace Slag

Why Ground Granulated Blast Furnace Slag

Properties from the listed products' own documents. Check each one against your project.

Product standard

BS EN 15167 (EPD cites BS EN 15167-1). Test standard: BS EN 15167-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1; S2 p3

Addition type

Type II addition. Test standard: BS EN 206 terminology

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S1 p1

Composition

Blast furnace slag 100% by weight %

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p3

Dry bulk density

1100.0 kg/m³. Test standard: not stated

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p3

Chemical criteria cited

Criteria listed for the CaO, SiO2 and MgO content, the (CaO + MgO)/SiO2 ratio and a glass ratio above 66 %; comparison symbols are not legible in the text extraction, so read EPD page 3 directly. Test standard: EN 197-1

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p3

Typical replacement of Portland cement

30% to 85%; common use 40% to 50% %

For your project: Check this declared value against the exact product designation and the conditions in its source document.

S2 p3

Limitations and What to Check

Read the exact product and source before specifying.

evoBuild GGBS

  • Obtain the DoP for the specific production site supplying the project; DoPs are issued per site (S1).
  • The product was renamed: confirm that delivery documents, DoP and EPD name the same product (the EPD still reads "Regen").
  • Confirm the maximum replacement level for the exposure class and strength class with the concrete producer under BS 8500 and BS EN 206; run trial mixes (S1).
  • Plan for slower early strength and extended setting, especially in cold weather (S1).
  • The EPD covers A1 to A3 only and uses economic allocation; check the allocation method used by any other EPD before comparing.
  • Confirm the EPD's validity on the EPD Norge register.
Read the Product Page

Where It's Used

Where the makers say each product goes. The diagram shows the part of the building, not a construction detail.

1

evoBuild GGBS

As stated by the manufacturer (S1):

  • Concrete, mortar and grout, including ready mixed concrete, precast concrete, paving and street furniture.
  • Soil stabilisation and other specialist applications.

Stated conditions and restrictions (S1):

  • Latent hydraulic binder: it needs the alkali environment of cement to react, so setting is extended and 1, 3 and 7 day strengths are lower; the data sheet says parity can typically be reached at 50% replacement against an equivalent CEM I concrete.
  • Maximum replacement levels must follow BS EN 206 and BS 8500 for the design chemical class, exposure condition and strength; trial mixes are recommended.
  • Concrete placed generally within 5 to 30 °C; cure for at least the first seven days; protect from frost.
  • Colour is lighter and cannot be guaranteed.
1. Structure

Specification Details

Read each value together with its unit, standard and document. Values tested on different bases are not interchangeable.

ProductDeclared Values and SourceNext Step
evoBuild GGBS

Product standard and addition type: BS EN 15167, Type II addition (data sheet June 2025 p1)

Typical replacement of Portland cement: 30% to 85%; common use 40% to 50% (EPD NEPD-8767-8422-2 p3, register not opened)

Dry bulk density: 1100.0 kg/m³ (EPD p3, register not opened)

Full Specification

Related Materials

Manufacturers

Heidelberg Materials UK

evoBuild GGBS

Product standard and addition type: BS EN 15167, Type II addition (data sheet June 2025 p1)

Typical replacement of Portland cement: 30% to 85%; common use 40% to 50% (EPD NEPD-8767-8422-2 p3, register not opened)

  • dop: On request (one DoP per production site; not located)
  • epd: Linked (NEPD-8767-8422-2, valid to 20.01.2030
  • certificate: Not checked
  • installationGuide: Not checked

DoP issued per production site; not located

About the Maker

Related Guides

Guides connected to ground granulated blast furnace slag through their material topics.

No published guides are connected to this material yet.

See all ground granulated blast furnace slag guides

Request Product Documents or Samples

Online requests are not open yet. Nothing you enter here is saved or sent.

Online Enquiries Are Not Open Yet

Online enquiries are temporarily unavailable. No information has been saved or sent.

You can continue browsing the website and using its available tools. No enquiry, subscription, purchase or listing is submitted here.

We may use AI tools to help review documents under human supervision. Tell us before sending documents if you prefer otherwise. How We Use AI

Submit a Project Requirement